DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
CROSS DIVIDER REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 137
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Front air lift bag stowage box removed (WP 0497)
Locknut (1)
Hose bed divider removed (WP 0525)
Lockwasher (2)
Pre-connect removed (WP 0577)
Lockwasher (6)
REMOVAL
TFFT01121A
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 10
Hose bed covers must be properly supported prior to removing support chain and
support rod. Failure to comply may result in serious injury or death to personnel or
damage to equipment.
NOTE
Both passenger side and driver side support chains and support rods are removed the
same way. Passenger side shown.
1.
Remove chain (1) from cross divider (2).
2.
Remove locknut (3), washer (4), and support rod (5) from cross divider (2). Discard locknut.
0517-1
