DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
HOSE BED DIVIDER REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
References
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 136
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Lockwasher (2)
Rear work platform unstowed (WP 0014)
Lockwasher (2)
Hose bed restraint net removed (WP 0523)
Lockwasher (2)
Hose bed cover opened (WP 0015)
Personnel Required
MOS 63B Wheeled vehicle mechanic (2)
REMOVAL
TFFT00057
NOTE
Perform Step (1) if removing pre-connect hose bed dividers.
1.
Remove pre-connect roller assembly (WP 0537).
NOTE
Note position of hose bed dividers prior to removal to ensure proper installation.
2.
Remove two nuts (1), lockwashers (2), washers (3), screws (4), and hose bed divider (5) from guide
bracket (6). Discard lockwashers.
0525-1
