DRAFT
TM 5-4210-249-13&P-3
0517
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01121
NOTE
Note position of caps prior to removal to ensure proper installation.
3.
Remove two caps (6), four nuts (7), lockwashers (8), eight washers (9), four screws (10), and pre-connect
B (11) from cross divider (2). Discard lockwashers.
4.
Remove six nuts (12), lockwashers (13), 12 washers (14), six screws (15), and cross divider (2) from vehicle.
Discard lockwashers.
END OF TASK
INSTALLATION
1.
Install cross divider (2) on vehicle with six screws (15), 12 washers (14), six lockwashers (13), and nuts (12).
Do not tighten nuts.
2.
Raise or lower cross divider (2) so that top of cross divider (2) is level with top of two side sheets (16).
3.
Tighten six nuts (12).
NOTE
Install caps as noted prior to removal.
4.
Install pre-connect B (11) on cross divider (2) with four screws (10), eight washers (9), four lockwashers (8),
nuts (7) and two caps (6).
0517-2
