DRAFT
TM 5-4210-249-13&P-3
0504
INSTALLATION
TFFT01328
NOTE
Driver side and passenger side door latches and linkage are installed the same way.
Driver side shown.
1.
Install dovetail (34) on door (3) with four screws (33).
NOTE
Perform Steps (2) through (5) if roller or cable was removed.
2.
Route cable (22) through two cable guards (31).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 5
Wear safety glasses while installing retaining rings to protect eyes from possible
injury or blindness.
3.
Install two pulleys (30), cable guards (31), and cable (22) on two studs (32) with retaining clips (29).
NOTE
Roller is threaded into bracket.
4.
Thread two rollers (27) into brackets (28). Do not tighten rollers (27).
5.
Install two nuts (26) on studs (32).
0504-4
