DRAFT
TM 5-4210-249-13&P-3
0503
INNER DOOR HANDLE REMOVAL
TFFT01398
NOTE
Locknut may come off stud or stud and locknut may come off together.
1.
Remove locknut (1) from inner door handle (2). Discard locknut.
2.
Remove door handle retainer (3) from inner door handle (2).
3.
Remove inner door handle (2) from door (4).
4.
Remove cotter pin (5) and pin (6) from wire rope assembly (7). Discard cotter pin.
END OF TASK
INNER DOOR HANDLE INSTALLATION
1.
Install wire rope assembly (7) on inner door handle (2) with pin (6) and cotter pin (5).
NOTE
Wide flange of door handle retainer must be installed toward door.
Door handle retainer slides under tab on handle.
2.
Install inner door handle (2) on door (4) with door handle retainer (3) and locknut (1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install crew cab inner door panel (WP 0507)
2.
Adjust crew cab door linkage (WP 0504)
END OF TASK
END OF WORK PACKAGE
0503-3/(4 blank)