DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
CREW CAB DOOR LATCH/LINKAGE REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Materials/Parts (continued)
Tool Kit, General Mechanic's: Automotive
Cotter Pin (1)
(WP 0622, Item 27)
Cotter Pin (1)
Cotter Pin (1)
Materials/Parts
References
Cotter Pin (2)
Self-Locking Screw (2)
WP 0615, Fig. 119
Self-Locking Screw (1)
Equipment Conditions
Cotter Pin (1)
Crew cab inner door panel removed (WP 0507)
Locknut (1)
REMOVAL
TFFT01326
NOTE
Driver side and Passenger side door latches and linkage are removed the same way.
Driver side shown.
1.
Remove spring (1) from door lock connecting lever (2) and door (3).
2.
Remove two cotter pins (4) and pins (5) from clevis (6). Discard cotter pin.
NOTE
Latch must be in closed position to remove lock.
3.
Remove two self-locking screws (7) from door lock mechanism (8). Discard self-locking screws.
0504-1
