DRAFT
TM 5-4210-249-13&P-3
0492
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00839
3.
Remove hose (8) from elbow (9).
NOTE
Pressure reducing valve and piping are replaced as an assembly.
4.
Remove two couplings (10) and (11) and pressure reducing valve (12) from vehicle (WP 0483).
NOTE
Note position of elbows, pipes, and valve prior to removal to ensure proper installation.
5.
Remove elbow (9) from pipe (13).
6.
Remove pipe (14) from pressure reducing valve (12).
7.
Remove pipe (13) from pressure reducing valve (12).
8.
Remove hose clamp (15) from pressure reducing valve (12).
END OF TASK
INSTALLATION
CAUTION
Pressure reducing valve must be open all the way before installing hose clamp.
Failure to comply will not allow correct flow of water.
NOTE
Install valve, pipes, and elbows as noted prior to removal.
1.
Install hose clamp (15) on pressure reducing valve (12).
2.
Install pipe (13) on pressure reducing valve (12) (WP 0489).
3.
Install pipe (14) on pressure reducing valve (12) (WP 0489).
0492-2