DRAFT
TM 5-4210-249-13&P-3
0493
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00108
CAUTION
Air lines may be removed directly from elbow and fittings, or may remain attached
to elbows and fittings and removed as an assembly. If air lines are removed form
elbows and fittings, care must be taken not to damage air line. If sealing surface of
air line is damaged air line must be repaired or replaced.
NOTE
Tag and mark air lines prior to removal to ensure proper installation.
Valve shown has air lines remaining attached to elbows.
3.
Remove two air lines (8) and (9) and elbows (10) and (11) from tank-to-pump intake valve (driver side) (12).
4.
Remove two couplings (13) and (14) and tank-to-pump intake valve (driver side) (12) from vehicle (WP 0483).
END OF TASK
INSTALLATION
1.
Install two couplings (13) and (14) and tank-to-pump intake valve (driver side) (12) on vehicle (WP 0483).
0493-2
