DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
VALVE CONTROL WIRE HARNESS REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 90
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Driver side crew cab access panel
Tags, Identification (WP 0625, Item 51)
removed (WP 0499)
Pump house panels Q and S removed (WP 0540)
Ties, Cable, Plastic (WP 0625, Item 58)
REMOVAL
TFFT03115
NOTE
Tag and mark connectors prior to removal to ensure proper installation.
Note position and remove cable ties, looms, and cushion clips as required.
Note routing of wire harness prior to removal to ensure proper installation.
1.
Disconnect TANK DRAIN valve control connector (1) from valve control wire harness connector (2).
2.
Disconnect GROUND SWEEPS valve control connector (3) from valve control wire harness connector (4).
3.
Disconnect EDUCTOR valve control connector (5) from valve control wire harness connector (6).
4.
Disconnect FLUSH valve control connector (7) from valve control wire harness connector (8).
0463-1