DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
SINCGARS AND TWO-WAY RADIO INTERCOM CABLE REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
TM 9-2320-325-14&P
(WP 0622, Item 27)
WP 0615, Fig. 59
Materials/Parts
Equipment Conditions
Tags, Identification (WP 0625, Item 51)
Intercom removed (WP 0395)
Ties, Cable, Plastic (WP 0625, Item 58)
Personnel cab panel A removed (WP 0311)
SINCGARS receiver/transmitter and power
adapter removed (TM 11-5820-890-10)
SINCGARS INTERFACE WIRE HARNESS REMOVAL
TFFT03336
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Note routing of intercom wire harness prior to removal to ensure proper installation.
Note position and remove cable ties, split loom, and cushion clips as required.
1.
Loosen thumbscrew (1) and remove intercom wire harness connector (2) from electronic mounting base (3).
0462-1