DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
CREW CAB INTERCOM WIRE HARNESS REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 84
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Crew cab bench seat removed (WP 0501)
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
Nylon washer (4)
Lockwasher (1)
REMOVAL
TFFT03280
NOTE
Tag and mark connectors prior to removal to ensure proper installation.
Note position and remove cable ties, split looms, and cushion clips as required.
Note routing of wire harness prior to removal to ensure proper installation.
1.
Remove four screws (1), nylon washers (2), and interface adapter bracket (3) from crew cab (4). Discard
nylon washers.
2.
Remove cover (5) from interface adapter (6).
3.
Disconnect five RJ-12 connectors (7) from interface adapter (6).
4.
Remove five RJ-12 modules (8) and crew cab intercom wire harness (9) from interface adapter (6).
0445-1