DRAFT
TM 5-4210-249-13&P-3
0388
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00700
3.
Remove four screws (5), preformed packing (6), and electric motor (7) from drive housing (3). Discard
preformed packing.
4.
Remove four screws (8), adapter (9), and preformed packing (10) from electric motor (7). Discard preformed
packing.
NOTE
Note position of gear on shaft prior to removal to ensure proper installation.
5.
Remove set screw (11) and gear (12) from shaft (13).
END OF TASK
INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Install gear on shaft as noted prior to removal.
1.
Apply thread lock adhesive to threads of four screws (5) and (8) and set screw (11).
0388-2