DRAFT
TM 5-4210-249-13&P-3
0311
PANEL E REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01925
CAUTION
When performing Step (1), pull instrument panel E forward only enough to access
wires. Failure to comply may result in damage to equipment.
1.
Remove five screws (1) and instrument panel E (2) from instrument assembly panel (3).
2.
Remove bumper turret control (4) from instrument panel E (2) (WP 0570).
3.
Remove governor control (5) from instrument panel E (2) (WP 0309).
4.
Remove nut (6) and indicator light (7) from instrument panel E (2).
5.
Remove two screws (8) and four wires (9), (10), (11), and (12) from indicator light (7).
6.
Remove nut (13) and buzzer (14) from instrument panel E (2).
END OF TASK
PANEL E INSTALLATION
1.
Install buzzer (14) on instrument panel E (2) with nut (13).
2.
Install four wires (12), (11), (10), and (9) on indicator light (7) with two screws (8).
3.
Install indicator light (7) on instrument panel E (2) with nut (6).
4.
Install governor control (5) on instrument panel E (2) (WP 0309).
5.
Install bumper turret (4) on instrument panel E (2) (WP 0570).
6.
Install instrument panel E (2) on instrument assembly panel (3) with five screws (1).
END OF TASK
0311-12
