DRAFT
TM 5-4210-249-13&P-3
0312
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01625
CAUTION
Dash panel should be pulled forward only far enough to cut wires. Failure to
comply may cause damage to equipment.
9.
Remove six screws (25) from dash (26) and pull dash (26) forward.
10. Cut wire 1412 (27), wire H012 (28), wire 1020 (29), and wire 1411(30) (TM 9-2320-325-14&P).
11. Remove seven screws (31) and lockwashers (32) from instrument panel assembly (33). Discard
lockwashers.
12. Cut wire 1187 (34) (TM 9-2320-325-14&P).
13. Remove four screws (35) and lockwashers (36) and pull panel (37) forward. Discard lockwashers.
0312-3
