DRAFT
TM 5-4210-249-13&P-3
0304
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT2505
6.
Remove four locknuts (22), screws (23), and water tank vent/fill handle (8) from water tank vent/fill cover (18).
Discard locknuts.
7.
Remove two locknuts (24), U-bolt (10), and pin (25) from water tank vent/fill handle (8). Discard locknuts.
NOTE
Note position of nuts on U-bolt prior to removal to ensure proper tension on spring during
installation.
8.
Remove two nuts (26) from U-bolt (10).
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) through (3) to install water tank vent/fill handle.
Install nuts on U-bolt as noted prior to removal.
1.
Install two nuts (26) on U-bolt (10).
2.
Install pin (25) on water tank vent/fill handle (8) with U-bolt (10) and two locknuts (24).
3.
Install water tank vent/fill handle (8) on water tank vent/fill cover (18) with four screws (23) and locknuts (22).
0304-4
