DRAFT
TM 5-4210-249-13&P-2
0262
INSTALLATION
NOTE
Install cable ties as required.
1.
Install two hoses (6) and (27) on pipe (28) and tighten two clamps (25) and (26).
2.
Install bracket (21) on vehicle with two screws (24), washers (23), and locknuts (22).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
CAUTION
Use sealing compound sparingly only on pipe threads. Do not apply compound to
hose connections. Damage to equipment may result.
3.
Apply sealing compound to threads of fitting (2) and elbow (4).
4.
Install fitting (2) and elbow (4) on primer pump (7).
5.
Install primer pump (7) on bracket (21) with two screws (20), washers (19), and locknuts (18).
6.
Install two wires (13) and (16) on stud (17) with locknut (15).
7.
Install two wires (12) and (13) on stud (14) with locknut (11).
0262-3