DRAFT
TM 5-4210-249-13&P-2
0255
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
19. Apply electrical sealant on end of wire (163).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00590
20. Apply thread lock adhesive to three screws (168).
21. Install three remaining screws (168) and cushion clip (169) on pump (82) and engine (164). Tighten screws to
23 lb-ft (31 Nm).
22. Apply sealant to three screws (168) to mark torque point.
23. Remove cable ties that were temporarily used to secure hoses and wires.
0255-24
