DRAFT
TM 5-4210-249-13&P-2
0255
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00590
9.
With the aid of an assistant, position pump (82) and two hoses (159) and (160) on vehicle.
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Remaining cushion clip and screw will be installed after removal of water pump guide pins.
10. Apply thread lock adhesive to seven screws (168).
11. Install pump (82) and cushion clip (169) on engine (164) with seven screws (168). Tighten screws to 23 lb-ft
(31 Nm).
12. Apply sealant to seven screws (168) to mark torque point.
13. Remove lifting strap from pump.
14. Remove two screws (167), eight washers (166), and chain (165) from pump (82).
0255-22