DRAFT
TM 5-4210-249-13&P-2
0255
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01569
15. Remove three water pump guide pins from engine (164).
TFFT00589
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
16. Apply thread lock adhesive to screw (162).
17. Install wire (163) on pump (82) and engine (164) with screw (162). Tighten screw to 23 lb-ft (31 Nm).
18. Apply sealant to screw (162) to mark torque point.
0255-23
