DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE REMOTE OIL FILTER HEAD AND HOSE REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Materials/Parts (continued)
Drain Pan (WP 0622, Item 9)
Preformed Packing (2)
Tool Kit, General Mechanic's: Automotive
Preformed Packing (2)
(WP 0622, Item 27)
References
Materials/Parts
WP 0615, Fig. 12
Oil, Lubricating (WP 0625, Item 37)
Equipment Conditions
Preformed Packing (1)
Pump house panel O removed (WP 0540)
Preformed Packing (2)
Water pump engine oil filter removed (WP 0244)
REMOVAL
TFFT1765A
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 13
Engine components become hot during normal operation. Allow engine to cool
completely prior to performing this task. Failure to comply could result in serious
injury to personnel.
NOTE
Note position of hoses prior to removal to ensure proper installation.
A small amount of oil may remain in hoses and fitting. Position a suitable container under
the hoses and fittings to catch any drainage.
1.
Remove two hoses (1) and (2) from elbows (3) and (4).
0247-1