DRAFT
TM 5-4210-249-13&P-2
0247
6.
Remove two hoses (1) and (2) from elbows (15) and (16).
7.
Remove two screws (17) and (18) and remote oil filter head (19) from bracket (20).
8.
Remove two elbows (15) and (16) from adapters (21) and (22).
9.
Remove two adapters (21) and (22) and preformed packings (23) and (24) from remote oil filter head (19).
Discard preformed packings.
END OF TASK
INSTALLATION
NOTE
Apply a small amount of clean lubricating oil to preformed packings before installing.
1.
Install two preformed packings (24) and (23) and adapters (22) and (21) on remote oil filter head (19).
2.
Install two elbows (16) and (15) on adapters (22) and (21).
3.
Install two screws (18) and (17) and remote oil filter head (19) on bracket (20).
4.
Install two hoses (2) and (1) on elbows (16) and (15).
NOTE
Apply a small amount of clean lubricating oil to preformed packings before installing.
5.
Install two adapters (12) and (11) and preformed packings (14) and (13) on remote oil filter adapter (7).
6.
Install two elbows (4) and (3) on adapters (12) and (11).
NOTE
Apply a small amount of clean lubricating oil to preformed packings before installing.
7.
Install remote oil filter adapter (7) and two preformed packings (9) and (8) on engine oil cooler (10) with
preformed packing (6) and mounting screw (5).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0247-3