DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE OIL PRESSURE SENDING UNIT REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 12
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Water pump engine OFF (WP 0022)
Preformed Packing (1)
Batteries disconnected (TM 9-2320-325-14&P)
REMOVAL
TFFT00757
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 13
Engine components become hot during normal operation. Allow engine to cool
completely prior to performing this task. Failure to comply could result in serious
injury to personnel.
1.
Remove connector (1) from oil pressure sending unit (2).
NOTE
Be sure preformed packing is removed with sending unit.
2.
Remove oil pressure sending unit (2) and preformed packing (3) from base (4). Discard preformed packing.
END OF TASK
0245-1