DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE FUEL INJECTOR(S) REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Cap Set, Protective (WP 0622, Item 3)
WP 0615, Fig. 18
Extractor, Handle, Injector (WP 0622, Item 13)
Equipment Conditions
Extractor, Injector (WP 0622, Item 14)
Pump house panels S, T, and U
Tool Kit, General Mechanic's: Automotive
removed (WP 0540)
(WP 0622, Item 27)
Pump operator's panel housing opened
Torx Tool Kit (WP 0622, Item 28)
(WP 0325)
Materials/Parts
Water pump engine noise panel
Grease, Automotive and
removed (WP 0242)
Artillery (WP 0625, Item 23)
Water pump engine valve cover and gasket
Seal, Sentry, Blue (WP 0625, Item 44)
removed (WP 0251)
Ties, Cable, Plastic (WP 0625, Item 58)
Injector tube (6)
Injector tube seal (6)
Sealing ring (6)
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04090
CAUTION
Fuel injector tubes must not be reused. Failure to comply may cause damage to
equipment.
NOTE
All fuel injectors are removed the same way. Fuel injector for number one cylinder shown.
1.
Remove glow plug wire (1) from tube seal (2).
0233-1