DRAFT
TM 5-4210-249-13&P-2
0233
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04092
NOTE
Glow plug wire is routed between forks of clamping pads.
3.
Using E10 socket, install two clamping pads (9) with screw (8) on fuel injector (6) and cylinder head (10).
4.
Tighten screw (8) to 12 to 15 lb-ft (16 to 21 Nm).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
5.
Apply sealant to screw (8) to mark torque point.
0233-5