DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE NOISE PANELS REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 12
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Pump house panels S and U removed (WP 0540)
Lockwasher (6)
Pump operator's panel housing opened
(WP 0325)
REMOVAL
TFFT01004
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 13
Engine components become hot during normal operation. Allow engine to cool
completely prior to performing this task. Failure to comply could result in serious
injury to personnel.
1.
Remove three screws (1) and lockwashers (2) from noise panel (3) and water pump engine frame (4).
Discard lockwashers.
NOTE
Note position of washers prior to removal to ensure proper installation.
2.
Remove three screws (5), lockwashers (6), washers (7), and noise panel (3) from water pump engine
frame (4). Discard lockwashers.
END OF TASK
0242-1