DRAFT
TM 5-4210-249-13&P-2
0209
NOTE
To ease installation, new hose from heater core to engine must be attached to old hose
and pulled through crew cab floor area because openings in crew cab floor cannot be
reached.
16. Cut old hose (3) and split loom (5) under crew cab and attach new hose (3) and split loom (5) to old hose with
tape.
17. Pull old hose (3) and split loom (5) through crew cab until new hose (3) and split loom (5) can be accessed in
crew cab.
18. Remove old hose (3) and split loom (5).
19. Slide hose (3) on fitting (8) with clamp (7).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00844
20. Attach hose (3) and split loom (5) on frame (6).
0209-7