DRAFT
TM 5-4210-249-13&P-2
0209
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00848
3.
Install split loom (19) on hose (15).
NOTE
To ease installation, new hose from heater core to engine must be attached to old hose
and pulled through crew cab floor area because openings in crew cab floor cannot be
reached.
4.
Cut old hose (15) and split loom (19) under crew cab and attach new hose (15) and split loom (19) to old hose
with tape.
5.
Pull old hose (15) and split loom (19) through crew cab floor until new hose (15) and split loom (19) can be
accessed in crew cab.
6.
Remove old hose (15) and split loom (19).
7.
Install hose (15) on valve (22) with clamp (21).
8.
Attach hose (15) and split loom (19) on frame (20).
0209-5
