DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE COOLANT/FUEL PUMP BELTS ADJUSTMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Equipment Conditions
Gauge, Belt Tensioner (WP 0622, Item 16)
Pump house panels U and J removed (WP 0540)
Tool Kit, General Mechanic's: Automotive
Water pump engine heat exchanger
(WP 0622, Item 27)
removed (WP 0240)
Water pump engine alternator belt
References
removed (WP 0224)
WP 0615, Fig. 17
ADJUSTMENT
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00904B
1.
Loosen two screws (1) and (2) on fuel pump bracket (3).
2.
Push fuel pump (4) toward coolant pump pulley (5) and tighten fuel pump drive belt (6) to 101 lb-ft (450 Nm)
as indicated by V-belt tension gauge.
3.
Hold fuel pump (4) in position and tighten two screws (1) and (2).
0195-1