DRAFT
TM 5-4210-249-13&P-2
0193
PRESSURE GOVERNOR RAMP ADJUSTMENT
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04345
1.
With MODE displayed in MESSAGE CENTER (1), press and hold IDLE switch (2) and PRESET switch (3),
and press MODE switch (4).
2.
Release IDLE switch (2) and PRESET switch (3) and press MODE switch (4) until RAMP is displayed in
MESSAGE CENTER (1).
3.
Press INC (increase) switch (5) to select RAMP.
NOTE
Adjustments to pressure governor controls should be made in small increments.
Note value of RAMP.
4.
Press DEC (decrease) switch (6), and decrease RAMP by one count.
5.
Press PRESENT switch (3).
6.
Press IDLE switch (2) to exit program.
END OF TASK
PRESSURE GOVERNOR GAIN ADJUSTMENT
1.
With MODE displayed in MESSAGE CENTER (1), press and hold IDLE switch (2) and PRESET switch (3),
and press MODE switch (4).
2.
Release IDLE switch (2) and PRESET switch (3) and press MODE switch (4) until GAIN is displayed in
MESSAGE CENTER (1).
3.
Press INC (increase) switch (5) to select GAIN.
0193-2