DRAFT
TM 5-4210-249-13&P-2
0169
TFFT04208
Step 3.
Remove high amperage 8 gauge cable from cord reel rewind ground
terminal (WP 0383). Check continuity across high amperage 8 gauge cable, from cord
reel rewind solenoid ground terminal connector to a known good ground.
If there is no continuity, replace 8 gauge cable from cord rewind solenoid to
ground stud (WP 0393).
Step 4.
Turn battery disconnect switch to ON position (WP 0007). Check for 22 to 28 VDC
between cord reel rewind solenoid power terminal to a known good ground.
If 22 to 28 VDC are not present, go to Step 11.
0169-3