DRAFT
TM 5-4210-249-13&P-2
0165
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT4752
NOTE
When removing cord reel, do not cut or disconnect any wires unless instructed to do so in
this procedure.
Step 20.
Unstow cord reel cord (WP 0037). Cut white wire at cord reel junction box. Check for
continuity from white wire (going to circuit breaker box) at cord reel junction box, to a
known good ground.
If there is no continuity, replace power cord from circuit breaker box to cord
reel junction box (WP 0361).
0165-15