DRAFT
TM 5-4210-249-13&P-2
0162
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03931
Step 11.
Check if passenger side power cord connector is securely connected on non-operating
portable handheld flashlight battery charger.
If power cord is not securely connected, reconnect power cord (WP 0405).
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 12.
Disconnect passenger side power cord connector from non-operating passenger side
portable handheld flashlight battery charger. Check for 10 to 14 VDC between wire
2075 at passenger side power cord connector and a known good ground.
If 10 to 14 VDC are not present, repair wire 2075 in passenger side body
wire harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0456).
0162-10