DRAFT
TM 5-4210-249-13&P-2
0162
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03928
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 5.
Disconnect driver side power cord connector from non-operating portable handheld
flashlight battery charger. Check for 10 to 14 VDC between wire 2075 at driver side
power cord connector and a known good ground.
If 10 to 14 VDC are not present, repair wire 2075 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side body
wire harness (WP 0448).
Step 6.
Check for continuity across wire 2640 from non-operating driver side power cord
connector to a known good ground.
a.
If there is continuity, replace non-operating portable handheld flashlight
battery charger (WP 0405).
b.
If there is no continuity, repair wire 2640 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0448).
0162-6
