DRAFT
TM 5-4210-249-13&P-2
0162
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03929
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 8.
Disconnect main wire harness driver side body wire harness connector. Check for 10 to
14 VDC between wire 2075 at main wire harness connector, terminal 8 and a known
good ground.
a.
If 10 to 14 VDC are not present, repair wire 2075 in main wire harness
if repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0455).
b.
If 10 to 14 VDC are present, repair wire 2075 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0448).
Step 9.
Disconnect main wire harness driver side body wire harness connector. Check for
continuity between wire 2640 at main wire harness connector, terminal 10 and a known
good ground.
a.
If continuity is not present, repair wire 2640 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0455).
b.
If continuity is present, repair wire 2640 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0448).
0162-8
