DRAFT
TM 5-4210-249-13&P-2
0156
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04227
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 19.
Put EMERG MASTER and UPPER REAR WARNING switches to off position
(WP 0004). Turn Service Drive Lights Off (TM 9-2320-347-10). Turn battery
disconnect switch to OFF position (WP 0007). Remove driver side deck spotlight and
bezel box cover (WP 0352). Disconnect driver side body wire harness upper rear
warning light connector from operating warning light (WP 0351). Disconnect driver side
body wire harness upper rear warning light connector from non-operating warning light
(WP 0351). Connect driver side body wire harness connector that was disconnected
from operating upper rear warning light to non-operating upper rear warning light. Turn
battery disconnect switch to ON position (WP 0007). Turn Service Drive Lights On
(TM 9-2320-347-10). Put EMERG MASTER and UPPER REAR WARNING switches to
on position (WP 0004). Check if upper rear warning light in non-operating position
operates.
If warning light connected to operating driver side body wire harness
connector does not operate, replace non-operating warning light (WP 0351).
0156-13
