DRAFT
TM 5-4210-249-13&P-2
0156
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02958
Step 17.
Put EMERG MASTER and UPPER REAR WARNING switches to off position
(WP 0004). Turn Service Drive Lights Off (TM 9-2320-347-10). Turn battery
disconnect switch to OFF position (WP 0007). Disconnect main wire harness driver
side body wire harness connector. Turn battery disconnect switch to ON position
(WP 0007). Turn Service Drive Lights On (TM 9-2320-347-10). Put EMERG MASTER
and UPPER REAR WARNING switches to on position (WP 0004). With a test lead set,
check for 22 to 28 VDC between wire 1613 (white) from main wire harness driver side
body wire harness connector, terminal 9 to a known good ground.
a.
If 22 to 28 VDC are present, repair wire 1613 in driver side body
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0448).
b.
If 22 to 28 VDC are not present, repair wire 1613 in main wire harness
if repairable (TM 9-2320-325-14&P), or replace main wire harness
(WP 0455).
0156-11
