DRAFT
TM 5-4210-249-13&P-2
0156
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04232
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 22.
Put EMERG MASTER and UPPER REAR WARNING switches to off position
(WP 0004). Turn Service Drive Lights Off (TM 9-2320-347-10). Turn battery
disconnect switch to OFF position (WP 0007). Disconnect rear body wire harness
lower passenger side upper rear warning light connector. Turn battery disconnect
switch to ON position (WP 0007). Turn Service Drive Lights On (TM 9-2320-347-10).
Put EMERG MASTER and UPPER REAR WARNING switches to on position
(WP 0004). Check for 22 to 28 VDC between wire 1613 (white) from rear body wire
harness lower passenger side upper rear warning light connector, terminal 3 to a known
good ground.
If 22 to 28 VDC are present, go to Step 25.
0156-16
