DRAFT
TM 5-4210-249-13&P-2
0156
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04227
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 16.
Put EMERG MASTER and UPPER REAR WARNING switches to off position
(WP 0004). Turn Service Drive Lights Off (TM 9-2320-347-10). Turn battery
disconnect switch to OFF position (WP 0007). Remove driver side deck spotlight and
bezel box cover (WP 0352). Disconnect driver side body wire harness upper rear
warning light connector. Turn battery disconnect switch to ON position (WP 0007).
Turn Service Drive Lights On (TM 9-2320-347-10). Put EMERG MASTER and UPPER
REAR WARNING switches to on position (WP 0004). With a test lead set, check for 22
to 28 VDC between wire 1613 (white) from driver side body wire harness upper rear
warning light connector terminal 3, to a known good ground.
If 22 to 28 VDC are present, go to Step 18.
0156-10
