DRAFT
TM 5-4210-249-13&P-1
0122
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03688
Step 15.
Disconnect cab power distribution wire harness cab pump control wire harness
connector. Turn battery disconnect switch to ON position (WP 0007). With a test lead
set, check for 22 to 28 VDC at cab power distribution wire harness connector wire 2834
(red), terminal 19 and a known good ground.
a.
If 22 to 28 VDC are present, repair wire 2834 in cab pump control wire
harness if repairable (TM 9-2320-325-14&P), or replace cab pump
control wire harness (WP 0443).
b.
If 22 to 28 VDC are not present, repair wire 2834 in cab power
distribution wire harness if repairable (TM 9-2320-325-14&P), or
replace cab power distribution wire harness and block (WP 0441).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install skid plate grille (if removed) (WP 0550)
2.
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0122-14