DRAFT
TM 5-4210-249-13&P-1
0115
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04112
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 19.
Turn battery disconnect switch to OFF position (WP 0007). Open pump operator's
panel housing (WP 0325). Disconnect pump house wire harness pump operator's
panel wire harness connector. Turn battery disconnect switch to ON position
(WP 0007). While an assistant pushes and holds pump operator's panel DRIVER
MAIN INLET PRIMER switch (WP 0004). With a test lead set, check for 22 to 28 VDC
between pump operator's panel wire harness wire 2788 (blue) at pump operator's panel
wire harness pump house wire harness connector, terminal 5 and a known good
ground.
a.
If 22 to 28 VDC are present, repair wire 2788 in pump house wire
harness if repairable (TM 9-2320-325-14&P), or replace pump house
wire harness (WP 0458).
b.
If 22 to 28 VDC are not present, repair wire 2788 in pump operator's
panel wire harness if repairable (TM 9-2320-325-14&P), or replace
pump operator's panel wire harness (WP 0459).
0115-13
