DRAFT
TM 5-4210-249-13&P-1
0114
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03468
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 42.
Put FOAM FLUSH switch to off position (WP 0004). Turn battery disconnect switch to
OFF position (WP 0007). Remove cab instrument panel A (WP 0311). Remove circuit
breaker 10 (WP 0398). Check for continuity across circuit breaker.
If there is no continuity, replace circuit breaker 10 (WP 0398).
Step 43.
Turn battery disconnect switch to ON position (WP 0007). Check for 22 to 28 VDC at
terminal wire 1138 in cab power distribution block.
a.
If there is 22 to 28 VDC, repair wire 2834 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0441).
b.
If there is not 22 to 28 VDC, repair wire 1138 in cab power distribution
wire harness if repairable (TM 9-2320-325-14&P), or replace cab
power distribution wire harness and block (WP 0441).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0114-30
