DRAFT
TM 5-4210-249-13&P-1
0114
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 33.
Remove skid plate grille (WP 0550). Turn battery disconnect switch to OFF
position (WP 0007). Disconnect main wire harness main 3 connector. With a test lead
set, check for continuity across main wire harness wire 2834 (red) from main 3
connector, terminal 13 to main wire harness pump operator's panel wire harness
connector DO1, terminal G.
a.
If there is continuity, repair wire 2834 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0441).
b.
If there is no continuity, repair wire 2834 if repairable
(TM 9-2320-325-14&P), or replace main wire harness (WP 0455).
TFFT03463
Step 34.
Put cab PUMP COOLER switch to off position (WP 0004) and release. Put pump
operator's panel FOAM FLUSH switch to ON position (WP 0004). Check if FOAM
FLUSH indicator illuminates.
If FOAM FLUSH indicator does not illuminate, go to Step 42.
0114-23
