DRAFT
TM 5-4210-249-13&P-1
0113
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03443
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 6.
Turn battery disconnect switch to OFF position (WP 0007). Open pump operator's
panel housing (WP 0325). Disconnect valve control wire harness connector from
PASSENGER SIDE AUX. INLET valve control. Disconnect valve control wire harness
connector from TANK FILL & RE-CIRCULATING LINE valve control. Connect
passenger side auxiliary inlet valve control wire harness connector to TANK FILL & RE-
CIRCULATING LINE valve control connector. Turn battery disconnect switch to ON
position (WP 0007). While an assistant monitors operation of passenger side auxiliary
inlet valve, push pump operator's panel TANK FILL & RE-CIRCULATING LINE valve
control OPEN and CLOSE buttons (WP 0004). Check if TANK FILL & RE-
CIRCULATING LINE valve control OPENED (green) and CLOSED (red) indicators
illuminate before passenger side auxiliary inlet valve is fully opened or closed.
If TANK FILL & RE-CIRCULATING valve control indicators do not illuminate
before passenger side auxiliary valve is fully opened or closed, reconnect
valve control wire harnesses to original positions and replace PASSENGER
SIDE AUX. INLET valve control (WP 0418).
0113-4
