DRAFT
TM 5-4210-249-13&P-1
0113
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 7.
Turn battery disconnect switch to OFF position (WP 0007). Reconnect valve control
wire harnesses to original positions. Remove passenger side auxiliary inlet valve
(WP 0294) and inspect it for binding, damage, and contamination.
a.
If passenger side auxiliary inlet valve is free from binding, damage, and
contamination, reinstall valve (WP 0294) and replace passenger side
auxiliary inlet valve motor and drive assembly (WP 0388).
b.
If passenger side auxiliary inlet valve is not free from binding, damage,
and/or contamination, repair (WP 0387) or replace passenger side
auxiliary inlet valve (WP 0294).
TFFT03439
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 8.
Turn battery disconnect switch to OFF position (WP 0007). Open pump operator's
panel housing (WP 0325). Check passenger side auxiliary inlet valve control wire
harness from PASSENGER SIDE AUX. INLET valve control to passenger side auxiliary
inlet valve motor for loose connections.
If passenger side auxiliary inlet valve control wire harness connectors are
loose, reconnect loose passenger side auxiliary inlet valve control wire
harness connectors (WP 0453).
0113-5
