DRAFT
TM 5-4210-249-13&P-1
0111
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02665
Step 12.
Connect No. 3 passenger side discharge valve control wire harness connector to No. 3
passenger side discharge valve motor. Disconnect driver pre-connect A valve control
wire harness connector from DRIVER PRE-CONNECT A valve control. Connect No. 3
passenger side discharge valve control wire harness connector to NO. 1 DRIVER
PRE-CONNECT A valve control. Turn battery disconnect switch to ON position
(WP 0007). While an assistant pushes pump operator's panel NO. 1 DRIVER
PRE-CONNECT A valve control OPEN and CLOSE buttons (WP 0004), check if No. 3
passenger side discharge valve operates.
a.
If No. 3 passenger side discharge valve operates, reconnect valve
control wire harness connectors to original positions and replace NO. 3
PASSENGER SIDE DISCHARGE valve control (WP 0417).
b.
If No. 3 passenger side discharge valve does not operate, reconnect
valve control wire harness connectors to original positions and replace
No. 3 passenger side discharge valve motor (WP 0388).
0111-11