DRAFT
TM 5-4210-249-13&P-1
0107
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03792
Step 12.
Connect driver side pre-connect A valve control wire harness connector to driver side
pre-connect A valve motor. Disconnect No. 3 passenger side discharge valve control
wire harness connector from NO. 3 PASSENGER SIDE DISCHARGE valve control.
Connect driver side pre-connect A valve control wire harness connector to NO. 3
PASSENGER SIDE DISCHARGE valve control. Turn battery disconnect switch to ON
position (WP 0007). While an assistant pushes pump operator's panel NO. 3
PASSENGER SIDE DISCHARGE valve control OPEN and CLOSE buttons (WP 0004),
check if driver side pre-connect A valve operates.
a.
If driver side pre-connect A valve operates, reconnect valve control
wire harness connectors to original positions and replace DRIVER
SIDE PRE-CONNECT A valve control (WP 0417).
b.
If driver side pre-connect A valve does not operate, reconnect valve
control wire harness connectors to original positions and replace driver
side pre-connect A valve motor (WP 0388).
0107-11