DRAFT
TM 5-4210-249-13&P-1
0107
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03847
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 11.
Turn battery disconnect switch to OFF position (WP 0007). Disconnect driver side pre-
connect A valve control wire harness connector from DRIVER SIDE PRE-CONNECT A
valve control. Disconnect driver side pre-connect A valve control wire harness
connector from driver side pre-connect A valve motor. With a test lead set, check for
continuity across discharge valve control wire harness from terminal to terminal.
If there is no continuity, repair driver side pre-connect A valve control wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side pre-
connect A valve control wire harness (WP 0453).
0107-10
