TM 5-4210-233-14&P-2
6-29. MAIN BEARINGS AND CRANKSHAFT - Contlnued
(7) Install two screws (7) each in front main
bearing cap (1 0) and rear main bearing cap
(11).
(8) Torque four screws (7) to 50 lb-ft (68 Nm).
(9) Strike front main bearing cap (10) and rear
main bearing cap (11) with soft-face hammer.
(10)
Torque four screws (7) to 110 lb-ft
(149
Nm).
(11)
Strike front main bearing cap (10) and rear
main bearing cap with soft-face hammer.
(12)
Torque four screws (7) to 230 to 240 lb-ft
(312 to 325 N.m).
(13)
Install spacer (12) and screw (13) on front of crankshaft (2).
NOTE
Bearing caps are numbered from 1 to 5 for later installation.
(14) Remove three center bearing caps (14).
6-143