Section V. MAINTENANCE OF TRANSFER CASE ASSEMBLY

TM 5-4210-224-14&P

6-22. CLUTCH ASSEMBLY REPAIR. (Continued)

ASSEMBLY

Install the pressure plate (11) in the cover

assembly (12) lining up the punch marks on the

edge of the pressure plate with the punch marks

on the edge of the cover.

Install pressure plate retracting springs and

drivestrap to pressure plate bolts (13) and lock

washers and torque to 11 ft-lbs (15 N ).

Section V. MAINTENANCE OF TRANSFER CASE ASSEMBLY

Para.

General................................................................

Transfer Case Assembly Repa............6-24

6-23. GENERAL.

This section contains information on the maintenance of the transfer case assembly that are maintainable at the

General Support level.

6-24. TRANSFER CASE ASSEMBLY REPAIR.

INITIAL SET-UP

Installer/Remover (J-8092)

Tools

General Mechanics Tool Kit

Snap Ring Pliers (J-23432)

Equipment Condition

Intermediate Shaft Remover/

Para. Condition Description

Installer (J-23429)

4-200 Transfer Case Removed

Intermediate Gear Bearing Cup

Installer (J-9276)

Material s/Parts

Front Output Shaft Bearing Retainer

Cleaning Solvent

(Appendix D, Item 44)

Seal Installer (J-22836)

Loctite 414

Rear Output Shaft Housing Bearing

Grease

Remover/Installer (J-23431)

Transfer Case

(148-9001)

Front Output Shaft/Front Bearing

6-52