INSTALLATION - TM-5-4210-224-14-P0470

TM 5-4210-224-14&P

5-8. ENGINE REPLACEMENT. (Continued)

s. Connect oil cooler lines at the engine

h. Install the fan shroud (paragraph 4-74).

(paragraph 4-77) and install lower fan shroud

bolts (paragraph 4-74).

i. Install upper radiator hoses at the engine

(paragraph 4-77).

t. Connect fuel return

lines

the

engine

(paragraph 4-87).

j. Install the fan (paragraph 4-75).

u. Install engine wire harness (paragraph 4-183),

k. Position the harness and connect EGR-PGR

transmission cooler lines (paragraph 4-192), and

solenoids, glow plug controller, and temperature

front battery cable clamp at the oil pan.

sensor.

v. Connect block heater.

l. Connect wiring to rocker arm clips including

glow plug wires.

w. Install front and rear engine mounting bolts

(paragraph 5-11).

m. Connect wiring at the injection pump (paragraph

4-93).

x. Install

transmission

bell

housing

bolts

(paragraph 4-192).

n. Connect ground cable at the alternator bracket

and alternator wires and clips (paragraph 4-

y. Position starter and install starter mounting

107).

bolts, and starter wires (paragraph 4-109).

o. Install fu l filter (paragraph 4-84) to cowl. Install

z. Connect exhaust pipes

the

manifolds

the air cleaner (paragraph 4-83).

(paragraph 4-101).

p. Fill the cooling system (paragraph 4-72).

aa. Install the flywheel cover bolts and remove the

transmission jack.

q. Install the hood (paragraph 4-148).

bb. Raise vehicle using jack, remove jack stands.

r. Raise vehicle using jack, install jack stands, and

Lower vehicle and remove jack.

lower vehicle.

cc. Reconnect battery cables.

5-13